VoltaELECTRICAL ESTIMATING
Blog · Guide

Electrical estimating for beginners

Electrical estimating is working out what a job will cost you to build, and what to charge for it, before the work starts. If you are pricing your first jobs, this is the short version: what an estimate has to include, the order to do it in, and where software helps. It is written for Canadian contractors, and the method is the same anywhere.

What an electrical estimate has to include

Every estimate, large or small, has the same parts:

  • A takeoff: the counted list of what the drawings require.
  • Labour: the hours to install it, and what those hours cost you.
  • Material: what you pay for it, with waste.
  • Overhead and contingency: the cost of running the business, and an allowance for what the drawings do not show.
  • Margin: what is left for the company.
  • Tax, and the permit where one is needed.

Definitions of each term are in the electrical estimating glossary.

Takeoff, labour, material and tax

Start with the takeoff, because every later number is arithmetic on it. A missed count is the most expensive mistake in estimating. Turn the quantities into labour hours using labour units, then adjust for the conditions of the job; labour units are explained here. Price the material from current supplier prices. Put the tax on the quote so the client sees the total they will actually pay. The full worked method is in how to estimate electrical work in Canada.

From a first draft to a number you will bid

Your first pass is a draft, whoever or whatever produced it. Before it becomes a bid, check the counts against the drawings a second time, read the specification for anything the drawings do not show, and compare the total with a job you have already finished. Then write down what you excluded. A bid is a number you are prepared to stand behind, and the checking is what earns that.

When software helps — and when it does not

Software does not teach you to estimate. It helps once you know the steps and the slow part is doing them: producing the first count, applying factors consistently, and formatting a quote. VOLTA drafts the takeoff from your PDF drawing set and prices it in a live cockpit, and it needs no formal training. The AI takeoff is a fast first draft, not a final count, so the checking in the section above still applies. If you price a few small jobs a year, a spreadsheet template may be all you need.

Next: how to bid electrical jobs.

Start a 30-day free trial

The price line is the same on every page: a 30-day free trial (card required, $0 today), then $9.99 CAD/month plus applicable tax. Every feature is included in the trial, the plan is month-to-month, and you can cancel anytime. Start the 30-day free trial, or read the pricing page first.

Frequently asked

What is electrical estimating?
Electrical estimating is working out what an electrical job will cost to build, and what to charge for it, before the work starts. It turns drawings into a takeoff, the takeoff into labour hours and material cost, and those into a price with overhead, margin and tax.
What does a beginner need to estimate an electrical job?
The drawings and specification, a way to count quantities, labour units to turn quantities into hours, current material prices, your own cost and billed rates, and the tax for your province.
Do I need software to start estimating?
No. The method works on paper or in a spreadsheet. Software helps once the slow part is producing the first count and formatting the quote.
Is the AI takeoff a final count?
No. It is a fast first draft, not a final count. VOLTA drafts from the drawing text, not measured geometry, and wire and conduit metres are allowances you adjust. Verify quantities against the drawings before you bid.

Learn the method first, then try it on a real job. Every feature is included in the trial.

Start 30-day free trial

Related: how to estimate electrical work in Canada · how to bid electrical jobs · glossary